Watch the farmer video and see these wheeled feeders in operation

Wheeled Cattle Feeders

These Cattle Feeders are designed with very deep troughs and large head room to accommodate adult cattle. Heavier gauge material is used to minimise damage and all edges are folded to avoid bruising. Under frame support keeps the units rigid under load while travelling.

Two sizes are available in this range.

The WNLF 24 Feeder has the capacity to hold a maximum of 4.3 m³.
The WLF 24 Feeder has the capacity to hold a maximum of 3.2 m³.

These stock feeders can also be used for chaff or hammer mill products.

 

Capacities are approximate only

• Elevated Lick block table at rear of unit.
  
• Double sided feed trays and adjustable slide controls which can be set low for lick feeding grain.
• The stock feeders have a full-length opening lid and has a heavy duty galvanized chassis with 15” wheels (WLNF 24) or 14” wheels (WLF24) (which are placed behind feeder to allow animals full access to feed trays).

These feeders may be towed full but caution needs to be taken as these units become heavy when full and place downward pressure on vehicle springs.

CODE:	Draw bar length	W/Top	W/Bottom	Height O/A	Skid Base
WNLF 24	1.3 meters long	2.100	1.100	2.000	300
WLF 24	1.3 meters long	2.100	1.100	2.000	300

 

Wheeled Medium Feeders

The WNMF 24 Feeder is the larger of the Medium Feeder range and has the capacity to hold a maximum of 2.8 m³ of feed. These dual purpose feeders have larger head room, bigger troughs all designed to accommodate both young cattle of sheep .

The WMF 24 Feeder has the capacity to hold a maximum of 2.4 m³.
The WMF 18 Feeder has the capacity to hold a maximum of 1.75 m³.

 

Capacities are approximate only

• Elevated Lick block table at rear of unit.
• These wheeled feeders are designed to feed lambs through to cattle up to 450 kg’s.
  
• Double sided feed trays and adjustable slide controls for lick feeding.
  
• The stock feeders have a full-length opening lid and has a heavy duty galvanized chassis with 14” wheels (which are placed behind feeder to allow full access to feed trays).

These feeders may be towed full but caution needs to be taken as these units become heavy when full and place downward pressure on vehicle springs.

CODE:	Draw bar length	W/Top	W/Bottom	Height O/A	Skid Base
WNMF 24	1.3 meters long	1.520	0.750	1.540	300
WMF 24	1.3 meters long	1.700	0.750	1.500	300
WMF 18	1.3 meters long	1.700	0.750	1.500	300

 

Wheeled Sheep Feeders

 

 

The WSF 24 Feeder has the capacity to hold a maximum of 1.5 m³.
The WSF 18 Feeder has the capacity to hold a maximum of 1.1 m³.

 

Capacities are approximate only

• The above stock feeders are designed to feed lambs or smaller framed livestock such as deer
  
• The stock feeders have double sided feed trays and adjustable slide controls which can be set low for lick feeding.
  
• The stock feeders have a full-length opening lid and a heavy duty galvanized chassis with 14” wheels (which are placed behind feeder to allow full access to feed trays)

These stock feeders may be towed full but caution needs to be taken as these units become heavy when full and place downward pressure on vehicle springs.

CODE:	Draw bar length	W/Top	W/Bottom	Height O/A	Skid Base
WSF 24	1.3 meters long	1.520	0.680	1.240	300
WSF 18	1.3 meters long	1.520	0.680	1.240	300